Metal Chip Briquetting Machine

The metal chip briquetting machine is mainly used for directly compressing metal materials such as cast iron scraps, steel scraps, copper scraps, aluminum scraps and high-quality ore fines into cones or other shaped cakes of 3 to 6 kg by high pressure to facilitate storage. Transport and reduce the loss of transportation and smelting during recycling and reuse.

Model classification:

This series of equipment is divided into two types: vertical type and horizontal type.

The vertical model is a popular model that can be widely used today. The design has large tonnage, large output and wide application range. The horizontal type is horizontally placed due to the main cylinder, the seal is affected by gravity, and the design pressure is increased. Unbalanced stress, local wear is large, use metal chip briquetting machine [vertical model]

The service life is greatly weakened, and it is unable to meet the requirements of long-term continuous use of large-yield, and the use of small-tonnage models (design pressure should not exceed 2000KN), and the application range is small. Acceptance and handover of equipment installation works.

(1) The construction acceptance of the equipment foundation shall be checked and accepted by the quality inspector of the construction department and the civil construction constructor, and the construction acceptance form shall be filled out. The basic construction quality must conform to the basic drawings and technical requirements.

(2) The final acceptance of the equipment installation project shall be carried out after the equipment has been commissioned. The equipment management department and the technical department cooperate with other departments to carry out inspection and acceptance in the installation, inspection, safety, use and other aspects of the relevant personnel, to make the identification, fill in the installation and construction quality, accuracy inspection, safety performance, test operation record, etc. The voucher and acceptance handover order can be completed by signing the personnel of the participating parties.

(3) Handling procedures after passing the equipment acceptance

Equipment unpacking acceptance (or equipment installation handover acceptance form), equipment operation test record form signed by the parties involved in the acceptance and the technical documents brought with the equipment, the equipment management department is included in the equipment file management; with the equipment accessories, For spare parts, fill in the spare parts storage form and send it to the equipment warehouse for storage. The safety management department should document the safety issues in the installation test.

(4) After the equipment handover is completed, the equipment management department signs the equipment production notification, and submits the copies to the equipment management department, the use unit, the finance department, and the production management department for use as archives, notices, fixed asset management certificates, and assessment projects. The basis of the plan.